Some people eat, sleep and chew gum, I do genealogy and write...

Saturday, November 19, 2016

Jumpstart Your Family History in Ten Steps: Step Eight -- Start doing basic research


Once you have entered everything you know or can easily find out about your family, you may start asking what is next? Where do you go from here? If you have entered your family information into one of the large, online family history programs, you may have already gotten some hints concerning documents that might add addition information and in some cases, additional people to your burgening family tree. If you have exhausted all your record hints, the next step is to start doing your own research, that is, looking for documents that might provide more information about your ancestors and their family members.

If you were following my advice for the Seventh Step and you have evaluated the entries, you already have recorded and probably noticed some missing information or even some discrepancies. What you do next is largely determined by where your ancestral families lived or where events occurred in their lives. To help you decide what you want to try and find next, you can use a Record Selection Table. A good example of a Record Selection Table is located in the FamilySearch.org Research Wiki; see this link https://familysearch.org/wiki/en/United_States_Record_Selection_Table. This particular table is focused on records in the United States and is designed to help you find the next type of record to search. If from looking at your records you have noticed a missing birth date or place. The Record Selection Table will suggest you might want to search Vital Records, Church Records or Family Bible Records. The Research Wiki can then assist you because each of the entries in the Table are linked to articles describing how to proceed to find information about that subject. The link for Vital Records takes you to the following page:


By studying the information on this page and all the pertinent links, you will know a lot about vital records and where to find them. This same page gives additional information about marriage and death records. If you continue to follow the links in the Research Wiki you will soon acquire enough information to begin actually searching for some records.

Another option is to go to The Family History Guide or TheFHGuide.com website. Project 4: Discover will take you through a step-by-step approach to acquire essential research skills. This particular approach leans more towards traditional, i.e. paper-based, genealogy than it does today's computer driven research using primarily online resources.

If you are using one of the major online database programs to host your family tree, such as the FamilySearch.org Family Tree, Ancestry.com, Findmypast.com or MyHeritage.com, you will find that each individual in your family tree has a link that essentially allows you to search the records on that particular website. The FamilySearch.org Family Tree has links to search three other websites; Ancestry.com, Findmypast.com and MyHeritage.com.

The idea of doing research involves asking questions such as "When was my Great-grandfather born?" Then, learning where records that can answer that question might be kept. Then searching the record for information about your ancestor. Here is an example of a search using the links on the FamilySearch.org family tree.

Let's suppose I was looking for the birth date of my Grandfather, Leroy Parkinson Tanner. Most beginning researchers would think they neeeded to start searching for a birth record or birth certificate. However, since I have been reading in the FamilySearch.org Research Wiki about "birth records" and since I suspect my Grandfather was born in Arizona, I look in the Research Wiki for information about Arizona birth records. Here is what I found.


So, now I click on this link and it takes me to the following page:


In order to find the birth date, I need to find a record that would have recorded his birth date. In this case, the types of records that I should search for are listed under the heading "Records that give birth information." If I have no idea or cannot estimate when he was born, I may have to search through a number of different sets or collections of records. But in this case, I remember that FamilySearch.org provided a record hint to a U.S. Census Record. Here is a copy of the Census record showing that Leroy Tanner was 45 years old in 1940. So he was probably born in about 1895.


Going back to the Research Wiki and looking at the time period that includes 1895, I come to the website for Arizona Genealogy Birth and Death Certificates or Genealogy.az.gov. But my search does not produce a copy of the birth certificate, likely because birth certificates as noted on the Research Wiki page were not mandated until 1909.

Where else can I go to search? One of the options listed for finding birth information is in military records. Since Leroy Tanner was born in 1895, he would have had to register for the draft at the time of World War I. This is the kind on information that genealogists need to know but only comes through knowing some history and then associating historical events such as wars, with the dates of of events in our ancestors' lives.

I go to my part of the Family Tree on FamilySearch.org and click on a search in FamilySearch.org. After sorting through the possible entries, I find a Draft Registration Card for Leroy giving his birth date of January 12, 1895. Here is a copy of both sides of the Draft Registration Card.


Finding more information may be just that simple or much more complicated. But now it is time to move onto the next step.

Here are the posts in this series.

http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_18.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_17.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_16.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_13.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_8.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_6.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_11.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_8.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_6.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten.html

Using Gazetteers to locate places on maps -- Part One


A gazetteer is a geographical listing of places or a directory based on names or other subject categories that is designed to be used in conjunction with a map or atlas. The most extensive current publication is the Wikipedia.org website. For example, here is a screenshot of a Wikipedia page for the city of Provo, Utah.



This example shows the Wikipedia article for Provo. In the upper right-hand corner there is a link to the geographic coordinates for the location of the town. Wikipedia now has over 5.2 million pages in English and millions of additional pages in other languages. Included in this vast online collection are articles about nearly every populated place on the planet. Tiny places like Nutrioso, Arizona with a population of 26 are included as well as all the major, large cities of the world. These articles constitute a worldwide gazetteer of previously unimagined scope.

The geographic coordinates can be used to find the place on another Google product, Google Maps with satellite images in high resolution of the entire earth. Here is a screenshot of the city of Provo, Utah first as a map and then as a satellite view. All you have to do is copy the coordinates and paste them into the search field.



Now, here is the satellite view.


Zooming in, you can see the Brigham Young University Library where I volunteer.


If you keep zooming in, you will finally get a street view of the campus where Google has walked around and taken 360 degree images of the entire campus. Here is the library from the street view.


Now, from a genealogical standpoint, if I know where an event occurred in my ancestor's life, I can use Google Maps to find the location and street view to see the location. For example, here is the house built by my grandfather in about 1920 in St. Johns, Arizona.


Let's suppose I wanted to find a place that I had no knowledge of such as a location mentioned where another grandfather lived called Salado, Arizona. Let's further suppose that I knew it might be somewhere around St. Johns, Arizona because my grandfather lived there and rode a bike to work. I can begin by looking for St. Johns, Arizona in Wikipedia.com. I can easily find the article by doing a Google search for "St. Johns Arizona Wikipedia."


It may be very helpful to read about the town where some of my ancestors lived, but since I want to locate a place, I click on the coordinates again. This takes me to the GeoHack, a listing of all the places on the internet that have information about this location.


I look down through the list of websites and choose GeoNames, an extensive listing of every place in the world on a map. Here is what happens when I click on the satellite view for GeoNames. This view gives me a satellite view of St. Johns with markers for geographically significant locations.


There is a pull-down menu to see a list of the tagged locations.


You can explore the area by clicking and dragging your mouse pointer around on the map. As you do this, the list will automatically change to show the locations. Just south of St. Johns, I found this marker for Salado and the Salado Springs.


This process can be used to find practically any location on the earth. Now what if you have no idea where a place is located? You can use the following procedure to location practically any place, anywhere.

First you go to the website for the USGS Board on Geographic Names. See http://geonames.usgs.gov/


This website has both domestic and foreign names in a huge database of places all over the world. Let's suppose I wanted to find Salado, Arizona using this website. I would simply click on the Domestic names link in the left-hand menu and then click on search.


Then I would do a search for Salado in the state of Arizona. In this case, I can guess the county is Apache County.


When I click on the "Send Query" button, I get a list of every place in Apache County, Arizona called Salado.

I can then click on the name of the place, Salado, and see the metric coordinates and use those to copy and then move to the Google Maps to see the location on the Map and from the street view. Here is the street view for Salado, Arizona.


Stay tuned for the next installment.

Friday, November 18, 2016

Jumpstart Your Family History in Ten Steps: Step Seven -- Constantly evaluate the entries in your family tree

At this stage of the process of beginning a family tree, you should already have at least some basic information in a family tree program. Ideally, you should also have supporting documentation for each of the conclusions you have made about your family relationship. Many beginners mistakenly feel that information they know from memory or obtained orally from immediate family members is inherently reliable. This is certainly not always the case and it is a good idea to try to document all of the information you have obtained even about your own parents and immediate family members. The concept here is that you are building bridge to the past. If you need to think about this bridge, you should think about it being built with Legos or the equivalent, i.e. piece by piece.


The bridge annalogy is not entirely appropriate because each succeeding generation in a family tree depends on the accuracy of preceeding generation. If I get one generation wrong, the rest of the pedigree is totally wrong. But if I left out one brick in this bridge, the bridge would not necessarily fall down.

What do I mean by evaluate? I mean that you need to carefully check and find records to support every conclusion. This is particularly true for conclusions involving the location of events and the birthplaces of children. I commonly find children included in families merely because the name happens to fit in the sequence of the children when the birthplace is not consistent with where the parents lived.

For some, the idea of evaluating every entry seems like a repetitious process that only slows down the research. But what good is it to advance rapidly if you are going down the wrong road, i.e. pursuing the wrong family line? Some genealogists, as I have written before, like to try to impress people with the number of names they have in their file or family tree. This is the equivalent to the people who used to teach classes in the old days and who carried in huge stacks of family group records and pedigrees to illustrate how much work they had done. We have spent too much time looking at numbers when we should be looking at the quality of the entries. If I wanted to copy other family trees without verification, I could double or triple the number of people I presently have in my master list in about an hour or two of copying. So what? How many of those names would be people I am not even arguably related to?

Quoting from Proverbs 17:1: "Better is a dry morsel, and quietness therewith, than an house full of sacrifices with strife." We need to be at peace with our selection of our ancestors and the only way to do this is through constant evaluation based on as many valid sources as we can discover.

I just published a long post that gives two illustrations of what I mean by evaluation. See the following: http://genealogysstar.blogspot.com/2016/11/locations-are-keys-to-finding.html. I was writing about the need to verify locations, but the examples apply to this step in getting a jumpstart on your genealogy. Anything worth doing is worth doing right.

Here are the posts in this series.

http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_17.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_16.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_13.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_8.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_6.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_11.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_8.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_6.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten.html

Locations are the keys to finding genealogical records


Over the years, for a number of reasons, I have been extensively involved in all aspects of real estate. One thing that is repeated by real estate professionals is an answer to the question, "What is important in real estate?" The answer is always location, location and location. Now, I am going to ask the same question about genealogy. What is the one most important consideration in genealogy? The answer happens to be exactly the same: location, location and location. Nearly every difficult research issue I have encountered over the years has ultimately revolved around identifying the location where an event occurred in an ancestor's or other relative's life.

I have often written about this subject over the years because it is a recurring theme in resolving difficult genealogical mysteries.

Before you begin searching for names and dates, you must identify the records that may be available to investigate. Records are created at or near the time of an event by someone who has an interest in the event or has a duty or obligation to record the event. Inevitably, these records are physically related to the place where the event occurred. So, identifying records concerning any event in the past requires an exact determination of the place where the event occurred and the entities having jurisdiction over the event. This means that if I want to determine if there is a birth record for my ancestor, I need to know the entities that existed at the time the birth occurred and the possibility that those entities kept a record of the birth. For example, today, we might search for a birth record in the state where the ancestor was born because states normally keep birth records. However, at some point in the past, the states either did not exist or did not keep birth records. In that case, we need to identify the entities that may have kept birth records at the time the ancestor was born. In this case, the entities could be the family keeping a Bible record or the local church recording a christening record.

The term "entity" may be confusing. This is the most inclusive term I can think of. It includes everything from nations to local churches and schools. Any organization that keeps records is included in my use of the term. Obviously the terms used to describe these entities change from country to country and also over time. Most, if not all of these entities, operate within a physical geographic area called a "jurisdiction." The definition of a "jurisdiction" in the way it makes sense to genealogists, is that it is the geographic or social area in which an entity has the ability or right or duty to make records.

These jurisdictions pile up like pancakes. The point here is that records can be kept by different entities depending on which entity had the ability, right or duty to create the record. So a military record may also be a record of a person's birth date. A death certificate may also contain a birth date. This is where the issue of finding appropriate records becomes really complicated. Some records, such as military, census and tax records, may be kept at a national level, some records such as births and deaths may have been kept at the state level, some records such as land and property and marriage records could be kept at the county level and other records could be kept in cities, towns and other municipalities. Some records are kept by individuals themselves such as journals, diaries and letters. As you search across the face of the earth, the organization and labels for these different jurisdictional levels change. They also change over time.

Another reason why identifying the location of an event is so important is the simple fact that people have the same names and can have very similar or the same dates associated with their life's events. In genealogy, matching people by name and date alone is called the "same name, same person" issue. In every case where this is a problem, the only way to differentiate people with similar names is to focus on the very specific locations where events occurred. In some cases, this involves identify the particular house where an event occurred. In one case I am familiar with, the county borderline went right through the house where this person was born and the birth had been reported to have occurred in both counties. So the issue was what part of the house was the person born in? Any reference to an event without adequate locational, i.e. jurisdictional, information is useless and probably wrong. I spent many years looking for the birthplace of an ancestor from Northern Ireland, where his own daughter had recorded the wrong place name. In addition, the wrong place name had been widely copied by his descendants. I finally found the actual name of the place and that cleared up the reason why no substantiating records had been found.

To make any real progress in genealogical research, you need to focus on the accuracy of the designations for where events occurred. Examples of the problems associated with ignoring this rule are more than evident in any online family tree. One of the most common problems encountered is the tendency to record the location of an event using the current designation. Basic to acquiring genealogical skills is the rule that places need to be recorded as their designations existed at the time the event occurred. Here is an example I have used before of what we are often confronted with when examining the way places have been recorded over the years by genealogists. I repeat this example from a couple of years ago because I regularly confront this same issue. Here is the list I obtained from old family group records on FamilySearch.org.
  • of Wimboldsley, Middlewich, Chshr, Engl
  • of Middlewich, Chshr, Engl
  • of Over, Chshr, Engl
  • of Frodsham, Ches.,Eng.
  • Overton Frodsham, Ches. Eng.
  • of Montgomery Co., Va.
  • Elliston, Montgomery, Va.
  • of Highland Co., Ohio
  • Marshell, Highland, Ohio
  • Clovis, Curry, N. Mex.
  • of Grossniedesheim, Pfalz, Bvr
To unravel these places and determine if they are correct, it is necessary to determine the associated dates. To illustrate this point, I need to refer to an example from some research I did on one of these listed place names some time in the past.

I picked one of these place at random from the 5+ million records and decided to look it up. The last one on my list above is recorded as "of Grossniedesheim, Pfalz, Bvr." The associated date is 1844. Let's see if that works out?

A first quick check in Wikipedia gives us the following: Großniedesheim is a municipality in the Rhein-Pfalz-Kreis, in Rhineland-Palatinate, Germany. By the way, the coordinates are 49°35′N 8°19′E. So why do we care? The real question is where are the genealogically pertinent records? This is where the municipality is today, where was it located in 1844? The rule is that genealogically pertinent records are created at or near the place where the event occurred depending on the jurisdiction in which the event was located. Records pile up like pancakes in layers depending on the time the event occurred. For example, there may be local, district or county, township, state and national records created at any given time depending on the event. Military records may be kept on a national basis. Church records may be kept in the administrative division of the church. Tax records may be kept by the taxing authority and so forth.

Let's go a little further. The Rhein-Pfalz-Kreis is a district (Kreis) in the east of Rhineland-Palatinate, Germany. The district was created in 1886 under the name Bezirksamt Ludwigshafen, one of the last acts of king Ludwig II of Bavaria. See Wikipedia. Hmm. So in 1844 this place did not exist as it is today. By the way, the word "Kreis" means district in German. Oh, actually it also means "circle" but is used for district. The German words for "district" are Bezirk, Kreis, Stadtteil, Viertel, Gegend, Gebiet, Gau, Teil, Quartier, Revier and Stadtviertel. Let's go a little further with this discussion.

The Rhineland-Platinate is one of the 16 states of the Federal Republic of Germany. See Wikipedia. This state was created in 1946. So we can pretty much appreciate the fact that records created in 1844 or there abouts might be a lot of places.

Before going on. Remember, our genealogist recorded this place as "of Grossniedesheim, Pfalz, Bvr," so we don't even know, at this point, if the event of 1844 took place in this location or somewhere else. The individual ancestor may have moved to this location later in life and was actually born in a completely different place. When the place was recorded as "of..." such and such, what did that mean? Well, we don't really know. If there is no source noted on the Family Group Record, we have to guess as to how the genealogist associated this person with this location.

But my point is that the location may or may not exist or at least, may not have existed at the time recorded for the event. So how am I supposed to find the record that produced the date? Hmm. Well, in this particular case, the genealogist was well above average and noted the following:

Evangelical Luth Ch Rec of Grossniedesheim, Pfalz, Bvr (GS ser no 26214 pt 2)

Hurray, a source citation. A quick check in the FamilySearch Library Catalog to see if there is a film number shows that the number is not from Germany, it is the Annual Genealogical Form from Nibley Ward, Utah. So let's look in the Catalog and see if there is still such a record.

Searching in FamilySearch.org Catalog for Bavaria gives me the following: See Germany, Bayem. I can then look for places inside of Germany, Bayem and there are probably 500 or so places listed and here is part of the list for places called "Pfalz."
  • Pfalz
  • Pfalz (Kurfürstentum)
  • Pfalz-Neuburg (Herzogtum)
  • Pfalz-Zweibrücken (Fürstentum)
OK, so now I am completely lost. So I will go back and see if there is anything for "Grossniedesheim" and skip all the other stuff. Now we are getting someplace. the FamilySearch Catalog has a place called "Germany, Bayern, Großniedesheim." Here are the records listed

Germany, Bayern, Großniedesheim - Church records ( 2 )

Kirchenbuch, 1700-1954
Author: Katholische Kirche Beindersheim (BA. Frankenthal)

Kirchenbuch, 1709-1936
Author: Evangelische Kirche Großniedesheim (BA. Frankenthal)

Germany, Bayern, Großniedesheim - Civil registration ( 1 )

Zivilstandsregister, 1807-1824
Author: Großniedesheim (Bayern). Standesamt

The church book records cover the time period and one of the records is for the Evangelical Lutheran Church. By the way, FamilySearch records the place as Manuskripten im Protestantischen Landeskirchenarchiv der Pfalz, Speyer, Bayern, Deutschland. Guess what? The records are of confirmations and deaths. The date recorded in the genealogist's family group sheet was for a birth.

This level of confusion and obfuscation are relatively common all originating from carelessly recording a place name and the supposedly associated record. In this case, the various countries or jurisdictions changed frequently in Europe during the 1800s and referring to the actual name of the place at the time of the event becomes even more important. From the list above, the "of" designation may help to orient the genealogist, but it can be very misleading to future researchers who begin looking for the information about the event in the jurisdiction specified.

Here is another example from the FamilySearch.org Family Tree of a place recorded for two of my direct line acestors.


Here are the places and dates associated with these two individuals.

William Tarbutt, b. ABT 1739, Cranbrook, Kent, England
Mary Boorman, b. 30 Sep 1744, Headcorn, Kent, Eng.

As you can see from the above image, their marriage supposedly took place in Goudhurst, Kent, England.

Why would I question these entries? Because they are very likely inaccurately recorded. According to Wikipedia, Cranbrook is a small town in the Weald of Kent in South East England. It lies roughly half-way between Maidstone and Hastings, about 38 miles (61 km) southeast of central London. It turns out that both Goudhurst and Headcorn are actual locations in England and less than 10 miles apart.

One of the sources listed is the following from the "England, Kent, Parish Registers, 1538-1911," database with images, FamilySearch (https://familysearch.org/pal:/MM9.3.1/TH-1942-23194-7323-7?cc=1952887 : 20 May 2014), Kent > Goudhurst > Marriages 1754-1792 > image 14 of 59; Kent Archives Office, Maidstone.


This record says that William Tarbut was from the Marden parish. However, the genealogist's record states that he was born in Cranbrook about seven miles away. None of these distances are a concern, but Cranbrook and Marden are two different parishes in Kent, England. Was he born in Marden or Kent. By the way, there are many sources attached to this particular person. One shows the following:


Did William Tarbut marry Mary Boorman or Elizabeth Balcomb or both? A search on Findmypast.com shows that there are 1,445 William Tarbutt records in their records for Kent, England and 53 of those records, with the same name, have events recorded within two years of the estimated date for our William Tarbutt to have been born. Findmypast.com has no birth records for that time period for Marden, Kent, England, but does have several marriage records including the one shown above. But there are several other marriages listed for men with the name William Tarbutt.

Further research does not clarify the situation. But here the illustration is used to show the importance of the exact location where certain events occurred. This is an either/or situation since the William Tarbut who marries Elizabeth Balcomb in 1778 cannot be the same as the one who married Mary Boorman in 1763 because Mary Boorman was still alive until 1777 however, there is no death record cited for Mary Boorman Tarbutt. To add to the confusion, the child of William Tarbutt who is supposedly my ancestor is recorded as Elizabeth Tarbutt, b. 17 December 1766 in Benenden, Cranbrook, England. However, Benenden and Cranbrook are really two different parishes not parts of the same place. There is a birth record showing where Elizabeth was christened.


So, it may be that we have the right William Tarbutt but there is still a doubt because of the contradiction in the marriage record. The only way to unravel these types of problems is to focus on the locations of the events. In this case, it may be necessary to resort to microfilm records in addition to the online records. 


Thursday, November 17, 2016

Jumpstart Your Family History in Ten Steps: Step Six -- Organize your workflow


The beginning genealogists is confronted with a bewildering variety of options for organizing genealogical data. Of course, there are still the traditional paper-based forms and some well-meaning genealogists who are teaching beginners encourage their students to begin with filling out a paper pedigree and the accompanying family group records notwithstanding this is an entire waste of time. This is expecially true with young people who are already immersed in the world of electronic devices. This is especially true when websites such as FamilySearch.org have a free app versions of the Family Tree program that can be used to add people directly.


The Family Tree app is available for both iOS and Android devices and allows the beginner to add people directly to the online FamilySearch.org Family Tree and perform almost all the functions of the full online version of the program. The average youth will identify much faster with the online app than they will with paper and pencil.

But that still leaves open the issue of designating a main location for storing genealogical data. There are several options. Here are some of them:
  • Paper-based filing system
  • A stand-alone family tree program 
  • An online family tree database program
  • A combination of two or more of these options
The genealogical workflow is sometimes referred to as the Research Cycle. Here is another copy of the cycle, I used in the first post in this series.


This popular diagram and all of its iterations is overly simplistic and in most cases, misleading as I previously indicated. In today's world, the researcher should take the following steps to ensure that the work done is not being duplicated and is preserved. 

A. Begin the online survey of the current status of your family's genealogy by reviewing the FamilySearch.org Family Tree and also searching in several of the large online database programs. Two of the following programs, Ancestry.com and MyHeritage.com, will automatically match those people you input into an online family tree with commonly related relatives in all of the other people in millions of other family trees on their websites. Both programs provide a way for the user to communicate directly with the relatives found for collaboration and provide automatic record hints to aid a newly established researcher the ability to rapidly grow a family tree in many instances. 

There are also three very large online wiki-based programs that encourage collaboration by sharing a free, unified, shared family tree: FamilySearch.org, Geni.com and WikiTree.org. The advantage of using these types of programs as a primary repository for your genealogical research is that there is a much greater possiblity that you will avoid duplicating the work of others. Of course, there is also the option of using all these programs plus others such as Geneanet.org and Findmypast.com that also supply automatic record hints. 

Taking on program for example, I have helped perhaps hundreds of people to add their initial family history information to MyHeritage.com. In almost all these cases, I have watched as the program's Instant Discoveries added numerous links to other users family trees who share relatives with the newly added family tree and at the same time help build the family tree with Record Matches to original genealogical data sources. 

B. Using the search capabilities of one or all of these programs, add the information found to the invididuals in your family tree. Be sure to carefully evaluate each record hint to make sure it applies to your family member and also remember to copy any information you find in the record to the individual's entry in your family tree. If you decide to use a local, desktop database program, you should choose a program that connects directly to an online family tree and can share individual information and source citations directly to that online program. Four of these programs are:
Some genealogists prefer to have their own program on their own computer where they can record incomplete or sensitive information before it is shared online. 

C. Continue adding carefully evaluated source records to your family tree. Once you have run out of automated record hints, you will need to begin the process of research records that are not automatically available. This is the point at which you will need to begin your education in genealogical research online. Of course, it is also possible that your might find the need for records that may apply to your family that are not yet digitzied and online. At this point, you are moving beyond the beginner's stage of the research process. 

It is my experience that even experienced and seasoned researchers fail to take advantage of the huge number of records that are already online. Millions upon millions of new, genealogical valuable records are being added to the internet daily. Using the online programs that suggest automatic record hints helps to move the beginner along, sometimes dramatically. But if this does not seem to be the case with your particular situation, you may need to start learning how and where to find additional records about your family that are not so easily acquired. 

So presently the process or workflow is as follows. I will use the FamilySearch.org Family Tree as an example.

First you add what information you know directly to the Family Tree. In some cases, if your ancestors have contributed information previously with FamilySearch or one of more of its predecessors, you may alreday have a substantial amount of information in the program before you even begin. In this case, you start by reviewing the information already available. Then you add in any new information supplied by the automated record hints. Then you begin adding information from the othre large online database programs after carefully evaluating it for sufficiency and applicability. You may also wish to contact any newly discovered family members for futher information. There is currently no reason to redo work done by others. But you should also be careful not to simply copy the work of others no matter how enticing that may be. You will at some point regret having added people willy-nilly to your family tree without carefule review and evaluation.

The workflow is from these online programs and their automated hints to your family tree.

Once you have estalished a family tree and added in all the automatically provided information, you are ready to move onto the next step. 

Here are the posts in this series.

http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_16.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_13.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_8.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_6.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_11.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_8.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_6.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten.html

45 Million Plus Obituaries Now on FamilySearch.org

For the last few years, FamilySearch.org has been working with GenealogyBank.com in adding millions of newspaper obituaties to the FamilySearch Historical Record Collections. Presently, there are 45,512,634 obituaries in the Collections. Over 34 million of these records have been indexed by an Optical Character Recognition (OCR) program. Because of this new-to-FamilySearch OCR option, the following instructions have been given:
Over 23 million records in this collection were transcribed by computer. There may be errors with names or relationships. Once you select a person a message appears at the top of the details page that begins with "This record was indexed by a computer; there may be errors". The link reading "the form on this page" opens the "Errors?" link at the lower left corner of the page. Please help us fix these records by reporting errors using the form that appears in the "Errors?" link. Options will appear allowing for the description of the problem. Reported errors will be reviewed and revised as necessary.
As of the date of this post, 34,168,513 of the images had been read by OCR and an index created for searching this vast database.

The OCR process coupled with user corrections will prove to be highly effective in adding indexed records to the FamilySearch.org collection effort to index all of the records. We also look forward to FamilySearch adopting some of the new handwriting OCR programs to add these records to the Historical Record Collections.

Wednesday, November 16, 2016

Jumpstart Your Family History in Ten Steps: Step Five -- Begin to develop your own personal methodology


There is a huge difference between trying to dig a hole with a pick and shovel and that of using a huge backhoe like the one above. By taking advantage of the tools provided by modern technology we can literally move from the pick and shovel methods of genealogical research to using powerful tools that are analogous to the powerful backhoe. Ironically, many wouldbe genealogists reject or ignore the advantages of technology for a variety of trivial reasons.

There is a gap between theory and methodology. In theory, genealogy is supposed to be a voyage of self-discovery. It is often represented as easy and fun. In my experience, self-discovery is often a painful process, it usually means giving up some habits and attitudes that are comfortable but do not let us advance and overcome our inherent limitations. This series is intended to outline, in ten arbitrarily selected steps, how to become started in doing genealogical research. The number of steps is certainly not as important as the concepts.

When I began researching my family history over thirty years ago, I very quickly concluded that unless I traveled to Salt Lake City, Utah and visited the Family History Library, I would be unable to ascertain the extent to which my accumulated relatives had already documented my family lines. Initially, I had some family group rcords from my immediate family that recorded my parents' four generations. In reviewing these records, I immediately found inconsistencies and errors. I also had the mixed benefit of inheriting a number of surname books and other records. I say this was a mixed benefit because the books, for the most part, lacked any supporting citations to the sources where the information was obtained.

By the time I started exploring my ancestry, I already had an extensive research background obtained from graduate school and law school as well as my own personal interest in research. Although this previous experience was helpful, it was not focused on the same type of research I needed to do to find historical records. That only came from years of application and persistence in trying to learn how to find genealogically significant records. Most of the supplemental information came from books and then, as I indicated in the last post, from classes and genealogy conferences.

During this same time period, I was also undergoing a huge transformation because of my interest and involvement in technology. I had the opportunity to become involved in computer technology from the very beginnings of the time when individuals were first able to take advantage of owning and using computers.

Now, what happens today is that genealogy is saturated with technology. Early on, all of the genealogists I met and interacted with were entirely paper-based and I was instructed in the very "traditional" methods of doing genealogical research. However, because I was intimately involved in computer technology, I began to adapt and change my methods as I became more involved in the technology. This process is ongoing and I must say that the technology today is changing even more rapidly than it was when I first began. This series of posts reflects my opinions about the methodology of becoming involved in family history or genealogy today but my methods and opinios with undoubtedly change in the very near future.

The basic outline of the traditional paper-based genealogical reasearch process dates back to the earliest times. I have referred to this booklet before, but it is a case in point. This is the third edition of a set of lessons developed back in the early 1900s, now over a hundred years ago.


It is available online for free from the Internet Archive. This is the link: https://archive.org/details/lessonsingenealo00gene

Except for the parts concerning the religious basis for genealogical research relating to the beliefs of The Church of Jesus Christ of Latter-day Saints, anyone familiar with traditional paper-based genealogy will immediately recognize that this particular methodoly has not changed substantially for over this time period. Some of the pertinent headings in the book are as follows:
  • Material and Sources of Information
  • Note and Record Books
  • Sources of Information
  • Personal
  • Bibles, Etc.
  • Correspondence
  • Libraries
  • Foreign Research
  • Use of Tradition
  • Care of Genealogical Information
Superficially, it would appear that what I am doing here is translating this same methodology and adapting it to computerization and the availability of records instantly online. But that is not the case. The changes in methodology are more than superficial adaptations of traditional research methods to a veneer of technology. What has happened involves much more than just a new set of tools to use, i.e. computers instead of paper and pencils. The changes really involve an entire restructuring of the work flow and the approach to the subject of genealogical research.

But despite all the changes, each individual needs to assess their own goals and develop their own methodology. There is always a tendency to return to traditional, paper-based methods of research. I still see those I am helping writing down notes with pencil or pen and adding printed copies of records to an ever increasing pile of paper records. The idea here is to move away from this traditional methodology. This does not mean simply copying your paper-based methods over to computer programs. It includes a whole new concept of the workflow.

To accomplish this, it is necessary to adapt to the current devices and programs. For example, instead of writing notes; using a smartphone or a tablet to make images of documents (where allowed) or maintain to-do lists and note taking. The main obstacle to accomplishing this transformation is adapting to and learning the operation of the programs and devices. In fact, this may be the most serious issue facing those who may want to adapt but do not yet have the skills in keyboarding or entering data in tablets and smartphones to take advantage of the technology. But fundamentally, the real issues lie more in the adaptation of research methods.

There are still five more steps and it is time to move on to the next one.

Here are the posts in this series.

http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_13.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_8.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_6.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_11.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_8.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten_6.html
http://genealogysstar.blogspot.com/2016/11/jumpstart-your-family-history-in-ten.html